Thomas High Temperature Resistant Adhesives With Wide Applications

General Product Information:

NameTransparent high temperature resistant adhesives with wide applications(THO4063)OutlineIt is modified epoxy adhesive, and its fluidity, color and temperature-resistance quality can be adjustable. It is easy and convenient to use for it solidifies fast at normal temperature and bonds well, The surface is bright and smooth, no bubbles forming after curing. .ApplicationsThis product is applied to the mixing, brushing, sealing of concrete, masonry, marble, stone and glass. Besides that, It also applies to the mixing, coating, self-bonding and mutual-bonding of silicate and blended composite materials.. Features:The A component is the tinted thick liquid, non-solid particle. The B component is in tinted paste shape. Fast curing velocity. At 25℃, 1-3 hour later, the surface cures, 18 hours later, it reaches its maximum bonding strength.It cures during 40-60 minutes if put into heating oven of 80-100 ℃ Being durable and resistant to ultraviolet light once the bond has formed.Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. With moderate viscosity, the adhesive leaves no bubbles, making the surface smooth and bright.Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use. You'll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.Non-toxic after solidification, though it is a little smelly.Being stable, its storage time is one and a half year.The main technical performance indicators are as follows:Heat resistance scope:-48-155℃Cementation intensity: Normal temperature: Tensilel strength≥35MPa; Shearing strength≥28 MPa150℃: Tensile strength 3-5 MPaInstruction1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry.2. Mix A and B in a proportion of 4: 1 to get perfect bonding result at fastest speed at 25 C.3. Spread the mixture on the substrates, put them together and apply some strength on them, finally, let them dry for 2-4 hours.4. If the surface of ceramics needs to be shaped after the coating, hot press molding or cold press molding should be applied when the adhesive is in its preliminary curing time.Notes1.The tools used to get adhesives should have exclusive usage.2. It is necessary to keep it well ventilated and away from fire .3.If it has contact with skin, you should wash with soapy water.4. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.


Marketplace:

Country:China
Industry:Adhesives Industry
Delivery Time:0000-00-00
Type:Selling Offer

Return to overview